- Seam Quality & Fixes
- The small spot where each layer starts and ends, often visible as a vertical line. Slicers can hide it in a corner or at the back.
- Shore hardness Materials
- A scale for how soft or flexible a material is. Common TPU is 95A (firm rubber); 85A and lower is softer and harder to print.
- Skirt Slicing & Settings
- A loop printed around, but not touching, the model at the start, to prime the nozzle and check the first layer.
- Slicer Files & Software
- Software that turns a 3D model into G-code layers for your printer, such as Bambu Studio, OrcaSlicer, PrusaSlicer and Cura.
- Spaghetti Quality & Fixes
- The tangled mess of filament that results when a print breaks loose mid-print. Failure detection cameras can catch it early.
- Spool Materials
- The reel that filament is wound on. Most hold 1 kg. Refills without a spool, used with reusable spools, cut down on plastic waste.
- STEP Files & Software
- A precise CAD file format used in engineering. It keeps true curves and is better than STL for editing and exchanging designs.
- Stepper motor Hardware
- The precise motors that move each axis and drive the extruder in small, exact steps.
- STL Files & Software
- The classic 3D printing file format that describes a model's surface as triangles. Universal, but it stores no color or settings.
- Stringing Quality & Fixes
- Thin hairs of plastic between parts of a print, caused by oozing during travel moves. Fixed by drying filament, lowering temperature and tuning retraction.
- Support interface Slicing & Settings
- The top layers of a support that touch the model. A good interface, or a different material like PVA, leaves a cleaner surface.
- Supports Slicing & Settings
- Temporary structures printed under overhangs that you remove afterward. Tree supports use less material and are easier to remove.