Learn / Glossary

Learn · A–Z Glossary

3D printing terms, explained in plain English

111 terms every maker runs into, from nozzles and PTFE tubes to stringing, warping and pressure advance. Search for a word or browse by category.

#

3DBenchy General
A small tugboat model used worldwide as a test print. Its overhangs, bridges, holes and fine details quickly show how well a printer is tuned.
3MF Files & Software
A modern 3D file format that stores the model plus colors, materials and print settings in one file. Bambu Studio and MakerWorld use it, and it has largely replaced STL for sharing ready-to-print projects.

A

Acceleration Slicing & Settings
How quickly the print head speeds up and slows down. Higher acceleration makes prints faster but can cause ringing if the printer isn't tuned with input shaping.
Adhesion (bed adhesion) Quality & Fixes
How well the first layer sticks to the build plate. Poor adhesion causes warping and prints coming loose; fixes include a clean plate, the right bed temperature, glue stick and a brim.
AMS (Automatic Material System) Hardware
Bambu Lab's multi-color unit that holds four spools and automatically feeds the right filament during a print. Versions include the AMS lite, AMS 2 Pro (with drying) and AMS HT for single high-temperature spools.
Annealing General
Baking a finished print in an oven at a controlled temperature to make it stronger and more heat resistant. It can shrink or warp the part slightly, so it's best for functional parts.
Articulated print General
A model with moving joints that prints already assembled, like the flexible dragons and animals in our gallery. Also called print-in-place.
Auto bed leveling (ABL) Hardware
A sensor that probes the build plate at many points and creates a map so the printer can compensate for tiny dips and bumps. Most modern printers do it automatically before each print.

B

Bambu Studio Files & Software
Bambu Lab's free slicer, which also sends prints to Bambu printers and connects with MakerWorld. It works with some other brands too.
Bed slinger Hardware
A printer whose bed moves back and forth on the Y axis, like the Bambu Lab A1 and A1 mini. Simple and affordable, but usually slower than CoreXY on tall prints.
Belts Hardware
Rubber timing belts that move the print head and/or bed. Correct tension matters: loose belts cause layer shifts and ghosting.
Bowden extruder Hardware
An extruder mounted on the frame that pushes filament to the hotend through a long PTFE tube. It keeps the print head light but makes flexible filaments harder to print.
Bridging Quality & Fixes
Printing a straight span across open air between two supports. Good cooling and the right speed keep bridges from sagging.
Brim Slicing & Settings
Extra loops printed around the base of a model to increase contact with the bed and prevent warping or tall parts tipping over. It peels off afterward.
Build plate (print bed) Hardware
The surface the print is built on. Most are removable, flexible spring-steel sheets coated with PEI or another surface, so prints pop off when you flex the plate.
Build volume General
The largest size a printer can print, given as width × depth × height in millimeters. For example, the A1 mini prints up to 180 × 180 × 180 mm.
BVOH Materials
A water-soluble support material, similar to PVA, that dissolves in water and works with PLA, PETG and some engineering filaments.

C

CAD (Computer-Aided Design) Files & Software
Software used to design 3D models from scratch, such as Tinkercad for beginners, Fusion and Onshape for more advanced work.
Calibration Slicing & Settings
Fine-tuning settings like flow rate, pressure advance and temperature for a specific printer and filament. Many modern printers calibrate themselves automatically.
Carbon fiber filament (CF) Materials
Filament with chopped carbon fibers mixed in, such as PLA-CF, PETG-CF or PA-CF. Stiffer, lighter and with a matte finish, but abrasive, so it requires a hardened nozzle.
CFS (Creality Filament System) Hardware
Creality's multi-color unit for the K2 series. Each unit holds four spools and up to four units can be chained for 16 colors.
Chamber heater Hardware
A heater that actively warms the air inside an enclosed printer. It prevents warping and layer cracks with ABS, ASA, nylon and polycarbonate. The X2D and H-series have one.
Clog (jam) Quality & Fixes
A blockage in the nozzle or hotend that stops filament from flowing. Causes include dust, heat creep, wet filament or printing too cold. Usually fixed with a cold pull or nozzle replacement.
Cold pull Quality & Fixes
A cleaning trick: heat the nozzle, push in filament, let it cool partway, then pull it out to remove debris stuck inside the nozzle.
Cooling fan (part cooling fan) Hardware
The fan that blows on the freshly printed plastic so it hardens quickly. Essential for PLA overhangs and bridges; usually turned down for ABS and ASA.
CoreXY Hardware
A motion system where two motors work together to move the print head in X and Y while the bed only moves down. It's fast and stable, and used by the P2S, X2D, H-series and K2.
Cura Files & Software
UltiMaker's free, popular slicer that works with many printer brands.

D

Delta printer Hardware
A round printer that moves the print head with three arms. Very fast for tall prints but less common today.
Direct drive extruder Hardware
An extruder mounted right on the print head, so the filament path to the nozzle is very short. Gives better control and handles flexible TPU well. Most modern printers use direct drive.
Drying (filament dryer) Materials
Heating filament to remove moisture it has absorbed from the air. Wet filament causes popping, stringing, weak parts and rough surfaces. Dryers and the AMS 2 Pro / AMS HT can dry spools.

E

Elephant's foot Quality & Fixes
When the bottom layers bulge outward from being squished by the bed. Fixed with a slightly higher Z-offset, a lower bed temperature, or the slicer's elephant foot compensation.
Enclosure Hardware
A closed cabinet around the printer that holds in heat and blocks drafts, dust and fumes. Needed for ABS and ASA; helpful for safety around kids and pets.
Extruder Hardware
The motor and gears that grip the filament and push it into the hotend at a precise rate.
Extrusion width (line width) Slicing & Settings
How wide each printed line is, usually close to the nozzle size (0.4 mm to 0.45 mm on a 0.4 mm nozzle). Wider lines are stronger; narrower lines show more detail.

F

FDM / FFF General
Fused Deposition Modeling, or Fused Filament Fabrication: the most common type of 3D printing, which melts plastic filament and lays it down layer by layer. Every printer in our Buyer's Guide is FDM.
Filament Materials
The plastic "thread" that FDM printers melt to make parts, sold on spools, usually 1 kg. The standard diameter is 1.75 mm. See our Filament Guide for every type.
Filament runout sensor Hardware
A sensor that pauses the print when the spool runs out or snaps, so you can load more and continue.
Firmware Files & Software
The software running on the printer's mainboard that controls motors, heaters and sensors. Bambu Lab uses its own firmware; others use Klipper or Marlin.
First layer Quality & Fixes
The most important layer of any print. If it's too high, the print won't stick; too low and it's squished and rough. Most print problems start here.
Flow rate (flow ratio) Slicing & Settings
A multiplier for how much plastic is pushed out. Too low leaves gaps (under-extrusion); too high causes blobs and rough tops (over-extrusion).
Flush volume (purge) Slicing & Settings
The amount of filament a single-nozzle multi-color printer pushes out to clear the old color before printing the new one. It's why multi-color prints can create a lot of waste.

G

G-code Files & Software
The line-by-line instructions, like "move here, extrude this much", that the slicer creates and the printer follows.
Ghosting (ringing) Quality & Fixes
Faint ripples or echoes of edges and text on the surface, caused by vibration at high speed. Fixed with input shaping, tight belts or lower acceleration.
Glass fiber filament (GF) Materials
Filament reinforced with glass fibers for stiffness and heat resistance. Like carbon fiber, it's abrasive and needs a hardened nozzle.
Glue stick Hardware
A thin layer of glue on the build plate helps difficult materials stick, and also acts as a release layer so PETG doesn't bond too strongly to smooth PEI.
Gyroid infill Slicing & Settings
A wavy, 3D infill pattern that's strong in every direction and prints quickly. A popular all-around choice.

H

Hardened nozzle Hardware
A nozzle made of hardened steel, tungsten carbide or with a ruby tip, which resists wear from abrasive filaments like carbon fiber, glass fiber and glow-in-the-dark.
Heat break Hardware
The thin metal tube between the cold and hot parts of the hotend. It stops heat from traveling up and softening the filament too early.
Heat creep Quality & Fixes
When heat travels too far up the hotend and softens filament before it reaches the melt zone, causing clogs. Often caused by a weak hotend fan or a hot, enclosed chamber with PLA.
Heat sink (hotend fan) Hardware
The finned metal block and fan at the top of the hotend that keep the upper part cool, so filament only melts where it should.
Heated bed Hardware
A build plate that heats up to help the first layer stick and reduce warping. PLA usually needs about 55 °C; ABS around 100 °C.
Heater block Hardware
The small metal block that holds the heater and temperature sensor and melts the filament right above the nozzle.
HEPA / carbon filter Hardware
Filters in enclosed printers that capture fine particles (HEPA) and fumes or odors (activated carbon). Many enclosed printers, like the Bambu Lab X2D, include them.
Hotend Hardware
The heated assembly that melts filament: the heat sink, heat break, heater block and nozzle.
Hygroscopic Materials
Describes filament that soaks up moisture from the air. Nylon, PVA, TPU and PETG are very hygroscopic; dry them and store them sealed.

I

IDEX Hardware
Independent Dual Extruder: a printer with two separate print heads that can print two materials, or two copies of a part at once.
Infill Slicing & Settings
The internal structure inside a print. 10% to 20% is typical for display pieces; 40% or more for strong functional parts.
Input shaping Slicing & Settings
A calibration that measures a printer's vibrations and cancels them out, allowing high speeds without ghosting. Done automatically on most modern printers.
Ironing Slicing & Settings
A finishing pass where the hot nozzle glides over the top layer, melting it smooth for a glossy flat surface.

K

Klipper Files & Software
Open-source printer firmware known for speed and advanced tuning. Used (often in customized form) by Creality, QIDI and many DIY printers.

L

Layer height Slicing & Settings
The thickness of each layer, commonly 0.2 mm. Smaller layers (0.08 to 0.12 mm) show finer detail but take longer; bigger layers print faster.
Layer lines Quality & Fixes
The fine horizontal lines visible on every FDM print. Thinner layers, silk or matte filament and sanding make them less noticeable.
Layer shift Quality & Fixes
When part of a print is suddenly offset sideways. Caused by the nozzle hitting the print, loose belts or skipped steps from moving too fast.
Lidar / AI failure detection Hardware
Cameras and sensors that check the first layer and watch for failures like spaghetti, automatically pausing the print.
Linear rails Hardware
Precision steel rails with bearing blocks that guide the print head or bed smoothly and accurately.

M

Mainboard Hardware
The printer's main circuit board that runs the firmware and controls everything.
MakerWorld Files & Software
Bambu Lab's free model-sharing site with one-click printing to Bambu printers. Find our models at @Veria3D.
Marlin Files & Software
Long-standing open-source printer firmware that powers many printers.
Max volumetric speed Slicing & Settings
How much plastic, in mm³ per second, a hotend can melt. It sets the real top speed of a printer more than the advertised mm/s.
MMU (Multi-Material Unit) Hardware
Prusa's multi-color add-on that feeds up to five filaments into one nozzle.
Multi-material / multi-color General
Printing more than one color or material in a single print, using an AMS, CFS, MMU, toolchanger or IDEX.

N

Nozzle Hardware
The small metal tip where melted plastic comes out. 0.4 mm is standard; 0.2 mm is used for fine detail, and 0.6 to 0.8 mm for fast, strong prints.

O

OBJ Files & Software
An older 3D file format that can store color and textures. Common in 3D scanning and art models.
OctoPrint Files & Software
Free software, often run on a Raspberry Pi, that adds remote control and monitoring to printers that don't have it built in.
OrcaSlicer Files & Software
A free, open-source slicer based on Bambu Studio and PrusaSlicer that supports many printer brands, with extensive calibration tools.
Over-extrusion Quality & Fixes
Too much plastic coming out: blobs, rough or bulging surfaces and parts that won't fit together. Lower the flow rate or check the filament diameter setting.
Overhang Quality & Fixes
Part of a model that sticks out over empty space. Most printers handle up to about 45 degrees; steeper overhangs need supports.

P

PEI sheet Hardware
The most popular build surface. Textured PEI gives a matte, grippy surface that releases prints easily; smooth PEI leaves a glossy bottom.
Perimeters (walls) Slicing & Settings
The outer loops of each layer. More walls (3 to 4) make parts much stronger than adding more infill.
Pressure advance (linear advance) Slicing & Settings
A setting that anticipates the pressure in the nozzle so corners stay sharp and lines stay even when speed changes.
Prime tower (wipe tower) Slicing & Settings
A small block printed beside a multi-color model where the printer cleans the nozzle after each color change.
PrusaSlicer Files & Software
Prusa Research's free slicer, known for powerful features and its wide printer support.
PTFE tube Hardware
Slick white tubing (Teflon) that guides filament from the spool or AMS to the extruder with very little friction. In Bowden setups, it carries filament all the way to the hotend.
Purge line Slicing & Settings
A line of filament printed at the edge of the bed before a print starts, to prime the nozzle so the first layer begins cleanly.

R

Raft Slicing & Settings
A thick platform printed under the model to improve adhesion on tricky shapes. Mostly replaced by brims on modern printers.
Resin printing (SLA / MSLA) General
A different technology that cures liquid resin with UV light. It's excellent for tiny detail like miniatures, but messier and needs gloves and ventilation.
Retraction Slicing & Settings
Pulling the filament back slightly before travel moves so it doesn't ooze. Tuning retraction distance and speed reduces stringing.

S

Seam Quality & Fixes
The small spot where each layer starts and ends, often visible as a vertical line. Slicers can hide it in a corner or at the back.
Shore hardness Materials
A scale for how soft or flexible a material is. Common TPU is 95A (firm rubber); 85A and lower is softer and harder to print.
Skirt Slicing & Settings
A loop printed around, but not touching, the model at the start, to prime the nozzle and check the first layer.
Slicer Files & Software
Software that turns a 3D model into G-code layers for your printer, such as Bambu Studio, OrcaSlicer, PrusaSlicer and Cura.
Spaghetti Quality & Fixes
The tangled mess of filament that results when a print breaks loose mid-print. Failure detection cameras can catch it early.
Spool Materials
The reel that filament is wound on. Most hold 1 kg. Refills without a spool, used with reusable spools, cut down on plastic waste.
STEP Files & Software
A precise CAD file format used in engineering. It keeps true curves and is better than STL for editing and exchanging designs.
Stepper motor Hardware
The precise motors that move each axis and drive the extruder in small, exact steps.
STL Files & Software
The classic 3D printing file format that describes a model's surface as triangles. Universal, but it stores no color or settings.
Stringing Quality & Fixes
Thin hairs of plastic between parts of a print, caused by oozing during travel moves. Fixed by drying filament, lowering temperature and tuning retraction.
Support interface Slicing & Settings
The top layers of a support that touch the model. A good interface, or a different material like PVA, leaves a cleaner surface.
Supports Slicing & Settings
Temporary structures printed under overhangs that you remove afterward. Tree supports use less material and are easier to remove.

T

Temperature tower Slicing & Settings
A test print that changes nozzle temperature every few millimeters to find the best temperature for a new filament.
Thermistor Hardware
The temperature sensor in the hotend and bed that tells the printer how hot it is.
Tinkercad Files & Software
Autodesk's free, browser-based design tool. The easiest place for kids and beginners to start designing their own prints.
Tolerance (clearance) General
The small gap designed between parts that need to fit or move together, such as 0.2 to 0.3 mm for print-in-place joints.
Toolchanger Hardware
A printer with several hotends or nozzles that it swaps between, so each color stays loaded and changes create almost no waste. Examples: Snapmaker U1, Bambu Lab H2C and H3C.
Top and bottom layers Slicing & Settings
Solid layers on the top and bottom of a print. Too few leave gaps or "pillowing" on top surfaces.
Tree supports Slicing & Settings
Branch-like supports that grow up from the bed to touch only where needed. Faster to remove and use less plastic than normal supports.

U

Under-extrusion Quality & Fixes
Not enough plastic coming out: gaps, weak and stringy layers. Causes include a partial clog, wet filament, printing too fast or too cold, or a low flow rate.

W

Warping Quality & Fixes
Corners curling up off the bed as the plastic shrinks while cooling. Fixed with a brim, a clean plate, a warmer bed and an enclosure for ABS and ASA.

Z

Z-offset Slicing & Settings
The fine adjustment of the gap between the nozzle and the bed for the first layer.
Z-wobble (Z-banding) Quality & Fixes
Regular ridges or bands up the side of a print, often from a bent lead screw or uneven Z movement.

Learn it hands-on

Reading is great, but nothing beats printing. Our workshops and one-on-one coaching take you from first print to multi-color projects.

See WorkshopsPrinter Buyer's Guide